Gumboots

Locomotives & Batteries Loco Controllers Airloaders Rolling Stock Caplamps Bova & Sisi Safety Shoes Wayne Gumboots Safety Accessories


Wayne Gumboots

Duralight

 

 

 

 

 

Duralight
Upper Black PVC
Sole Black PVC

Features:

• Standard grade PVC moderate resistance to chemicals
• Fine knit nylon socks are easy to clean and quick drying
• Foot comfort and hygiene are are improved if socks are worn
• Boot mass is minimised by concentrating material where required.
• Thicker walls where required for protection.
• Thinner walls where required for flexibility and comfort.
• Optimal toe spring for walking and kneeling.
• Sole design is optimised for slip resistance.

Size Range & Packing Details:

All sizes are available and these come packed 10 pairs per carton for the local market and 6 pairs per carton for the export market.

Optional extras include contour moulded cushion insole to enhance comfort and reduce fatigue and fur liner for warmth and comfort in cold environments.



Wayne Gumboots

Ladies Upper Black

 

 

 

 

 

Ladies
Upper Black PVC
Sole Black PVC

Features:

•This range of boots are for general purpose application in normal wet working environments. Steel toe caps and steel midsoles are not available for this range.
• Non-nitrile PVC grades provide optimum flexibility and resistance to abrasion. PVC provides maximum protection in wet and cold working conditions and good protection from many chemicals. (Refer Chemical Resistance Schedule).
• Sole design provides maximum slip resistance.
• Exterior is smooth making these boots easy to clean and sanitise.
• Fine knit nylon liner easy to clean and dries quickly for maximum hygiene.
• Boot design ensures material is distributed for maximum protection where required (ankles, heel and toe areas) and minimised elsewhere for maximum flexibility and minimal mass.
• Optimal toe spring minimises cracking at flex points while ensuring the boot is easy and comfortable to walk in.

Size Range & Packing Details:

All sizes are available and these come packed 10 pairs per carton for the local market and 6 pairs per carton for the export market.

Optional extras include contour moulded cushion insole to enhance comfort and reduce fatigue.


Wayne have adopted the EN 345 specification as a benchmark as being the most widely adopted standard for this category of footwear. In most cases other countries standards are either identical or very similar. In some cases the test methods are different and therefore yield different results. However, individual components invariably comply with the various specifications in spite of the different test methods used. Where a component does not comply with a given specification this will be highlighted.


Description: http://www.wayneplastics.co.za/tech_clip_image002.gif

CE marking (also known as CE mark) is a mandatory conformance mark placed on many products destined for the European market.  The marking certifies that a product has met European Directives regarding consumer safety, health or environmental requirements. By affixing the CE marking to a product, the manufacturer declares that it meets EU safety and health and environmental requirements
Wayne Plastics A Division of Feltex footwear complies with 
ISO 20345/A1:2007 (Directive 89/686/ECC) requirements for personal protective equipment PPE (category II) in terms of durability, comfort and slip resistance.
Testing and certification is carried out by any ISO accredited testing house.:

EUROPEAN STANDARD 
(NORME EUROPEENE)
EN

 

Description: http://www.wayneplastics.co.za/tech_clip_image001.jpg

This  Standards Mark™ is a  recognized symbol for reliability, quality assurance, and safety.
Standards Australia has produced a new edition of AS/NZS, 2210.3: 2009, Specification for Safety footwear
As with the previous versions, these standards are based on the ISO20345 7:2004 (International Standards Organisation)
Annual audits are conducted on site by specialised SAI- Global Auditors in compliance to the SAI Global Product Compliance Program and TS2210.05 Technical Schedule for Occupational and Safety Footwear.
By applying this Standards Mark to our footwear, warrants that the product meets all relevant requirements of this specified Standard

QUALITY ASSURANCE SERVICES
(QAS)
AUSTRALIA

 

Description: http://www.wayneplastics.co.za/images/SABS_Approved_Logo.gif

The SABS confines itself to the requirements of the local market but has been accredited by the various international authorities to conduct tests on their behalf and to monitor both the maintenance of quality standards and compliance to ISO 900:2008. Local specifications are a hybrid of international specifications and standards determined internally by participating organisations. However, the process of altering specifications to match those of EN ISO 20345 is in progress.
The SABS conducts 2 annual ISO 9001: 2008 Audits including 2 annual Mark Bearing Scheme Permit Audit

SOUTH AFRICAN BUREAU OF STANDARDS
(SABS)




Page 1 of 2 Page 2 of 2

Features of a Boot DOWNLOAD